SN74HC175D Overview

The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74HCseries of FPGAs. You should not exceed 60MHzin its output frequency. A total of 1elements are contained within it. There have been 16 terminations. This D latch belongs to the family of 74HC175. A voltage of 5V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. Devices in the HC/UHfamily are electronic devices. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 16. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 4 Bits. As soon as 6Vis reached, Vsup reaches its maximum value. Normal operation requires a supply voltage (Vsup) above 2V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Featuring the maximum design flexibility, it has an output current of 5.2mA . It has 2 output lines to operate. The number of input lines is 3. It consumes a total of 8μA quiescent current at any given time. It is reported that there are 4 channels.

SN74HC175D Features

Tube package
74HC series
16 pins
4 Bits

SN74HC175D Applications

There are a lot of Texas Instruments SN74HC175D Flip Flops applications.

• Data transfer
• Frequency Divider circuits
• Matched Rise and Fall
• Modulo – n – counter
• Balanced Propagation Delays
• Buffered Clock
• Bus hold
• 2 – Bit synchronous counter
• Storage Registers
• Latch