SN74HC373PW Overview

The 20-TSSOP (0.173, 4.40mm Width) package contains it. Packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The voltage supply is 2V~6V. During operation, the temperature is set at -40°C~85°C. In the 74HC series, this FPGA is located. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. The family it belongs to is 74HC373. It operates with a supply voltage of 5V. The device is equipped with 20 pins. HC/UH is the family of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. 6V is the maximum voltage (Vsup) that can be supplied. There is 2/6V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits are represented by 8 input lines. Its output current of 7.8mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V.

SN74HC373PW Features

20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies

SN74HC373PW Applications

There are a lot of Texas Instruments SN74HC373PW Latches applications.

• Avionics
• Buffer register
• Hammer Device Information
• Watches
• Buffer Storage
• Counter control
• Serial Output Register
• Counter
• Counters
• Data acquisition