SN74HC393N Overview

The device is packaged in the 14-DIP (0.300, 7.62mm)type. This configuration uses 14terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 2elements is provided by wires. All component pins are equal to 14. There is a package in the form of Tube. As part of the circuit, there are 14pins that connect other components. The Through Holeway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Further related parts may be found under the base part number 74HC393. To operate, the device requires a voltage of [0]. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 60MHz. It is possible to provide a voltage up to 6V (Vsup).

SN74HC393N Features

Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz

SN74HC393N Applications

There are a lot of Texas Instruments
SN74HC393N Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications