SN74HC4851PWRG4 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4851. Internally, this switch multiplexer has a resistance of 195Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 2μA. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. The 8 inputs need to be operated in order to work.

SN74HC4851PWRG4 Features

1 Channels
2μA Supply Current

SN74HC4851PWRG4 Applications

There are a lot of Texas Instruments SN74HC4851PWRG4 Analog Switches & Multiplexers ICs applications.

• Voice over IP/DSL – Integrated Access Devices, Smart
• Ultrasound
• T1/E1 Terminals
• High speed data transmission line cards
• SONET
• E1 Multiplexer
• Digital Cross-Connects
• PDH Multiplexers
• Sample-and-hold systems
• Wireless Local Loop