SN74HC573AQPWRQ1 Overview

The 20-TSSOP (0.173, 4.40mm Width) package contains it. A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~6V voltage supply is required for operation. During operation, the temperature is set at -40°C~125°C. In the Automotive, AEC-Q100, 74HC series, this FPGA is located. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74HC573 family. A 5V voltage supply is required for operation. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of HC/UH. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 6V. There are 2/6V power supplies required for this machine to operate. A supply voltage (Vsup) greater than 2V is required. Considering the reliability of this device, it would be a good candidate for TR. Input lines are converted into binary equivalents by 8 output lines.

SN74HC573AQPWRQ1 Features

20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies

SN74HC573AQPWRQ1 Applications

There are a lot of Texas Instruments SN74HC573AQPWRQ1 Latches applications.

• Frequency
• Automotive ADAS
• Registers
• Parallel data synchronization
• Shift right register
• Data acquisition
• Decade counting
• Ring counter
• Parallel Output
• BCD counting