SN74HC594DTE4 Overview

This device can be found embedded within the package SOIC. 16 is the sum of the number of terminations in the chip. Presented in a case of Tape & Reel (TR). A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. There are 16 pins on the device. Surface Mount is recommended for mounting. The electronic component belongs to the HC/UH. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. There are a total of 16 pins on it. This product should not be used at temperatures above 125°C. It should not be less than -40°C when operating this device. Under 6V, this voltage is employed. Operation is available on only 10 output lines. In this device, there are 4 circuits.

SN74HC594DTE4 Features

With 16 pins
With 10 output lines

SN74HC594DTE4 Applications

There are a lot of Texas Instruments SN74HC594DTE4 Shift Registers applications.

• Pattern Recognizers
• Sequence generator
• data transfer
• Pulse Extenders
• Data manipulation
• Interconnectors
• Data Format Converters
• Serial-to-parallel data conversion
• data manipulation
• Serial-to-parallel data conversion