SN74HC594DWE4 Overview

The device is embedded in 16-SOIC (0.295, 7.50mm Width) package. 16 is the total number of terminations on the chip. There is a Tube case containing it. 5V is the part's operating supply voltage. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. The component is positioned in the way of Surface Mount. A temperature range of -40°C~85°C is used for the operating environment. There is a votage of 2V~6V provided with it. The 74HC series represents this electrical component. Similar parts can be found using the 74HC594 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. The minimum supply voltage (Vsup) for this part should not be less than 2V. This device has 1 input lines available. It can deliver voltage at 2/6V. This part requires a maximum supply voltage (Vsup) of 6V. Operation is available on only 9 output lines.

SN74HC594DWE4 Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines

SN74HC594DWE4 Applications

There are a lot of Texas Instruments SN74HC594DWE4 Shift Registers applications.

• Serial-to-parallel data conversion
• Serial-to-parallel data conversion
• Counter
• Sequence generator
• Delay Line
• data manipulation
• Remote control holding register
• temporary data storage
• Output expansion
• 8-bit data storage