SN74HC595DBRG4 Overview

The device is embedded in 16-SSOP (0.209, 5.30mm Width) package. 16 is the total number of terminations on the chip. It is used to pack in Tape & Reel (TR) case. A voltage of 5V is specified for the part's operating supply. 16 pins are located on the device. The recommended mounting method is Surface Mount. Electronic components fall under the category of HC/UH. There is a component mounted in the way of Surface Mount on this board. There is a temperature range of -40°C~85°C. The voltage supplied to it is within the range of 2V~6V. Similar parts can be found using the 74HC family. Search for similar parts based on the 74HC595 family. It's noted that the chip's operating supply voltage is in the range 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 2V for this part. The device has a total of 1 input lines. Devices with voltage delivery capabilities of 2/6V are available. 6V Vsup is the maximum supply voltage (Vsup) for this part. There are 9 output lines to operate. There is TR packaging for this part.

SN74HC595DBRG4 Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR

SN74HC595DBRG4 Applications

There are a lot of Texas Instruments SN74HC595DBRG4 Shift Registers applications.

• Pseudo Random Pattern Generator
• Data Format Converters
• data manipulation
• 8-bit data storage
• Counter
• Delay Line
• Remote control holding register
• Pattern Recognizers
• Serial-to-parallel data conversion
• Dual-rank shift, hold, and bus applications