SN74HC595DRE4 Overview

16-SOIC (0.154, 3.90mm Width) is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. A Tape & Reel (TR) case is used to pack it. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the HC/UH. Its mounting method is Surface Mount. -40°C~85°C is the range of operating temperatures for the device. During operation, the voltage is within the range of 2V~6V. 74HC is the series number of this electrical component. A 74HC595 family can be used to search for similar parts. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, the minimum supply voltage (Vsup) should not be less than 2V. Devices with voltage delivery capabilities of 2/6V are available. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. A total of 10 output lines are available for operation. An electronic device such as this one has 4 circuits in it. In order to package the part properly, TR is used.

SN74HC595DRE4 Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Packing Method : TR

SN74HC595DRE4 Applications

There are a lot of Texas Instruments
SN74HC595DRE4 Shift Registers applications.

• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data