SN74HC595PWR Overview

There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. It sums up to 16 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. Its operating supply voltage is rated at 5V. There are 1 elements on this part. 16 pins are located on the device. It is recommended to mount by Surface Mount in order to get the best results. In the HC/UH series, the electronic component belongs. This component is mounted in the way of Surface Mount. Operating temperatures are within the range of -40°C~85°C. Voltages within 2V~6V are supplied to the device. The 74HC series contains this electrical component. With 74HC595 family search, you can find similar parts. The operating supply voltage of this chip is noted to be within the range 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. A voltage of 2/6V can be delivered by it. This part requires a maximum supply voltage (Vsup) of 6V. There are 10 output lines to operate. A quiescent current of 8μA is used. In this device, there are a total of 4 circuits. TR is the packaging way for the part. Frequency 42MHz is used by the device.

SN74HC595PWR Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR

SN74HC595PWR Applications

There are a lot of Texas Instruments SN74HC595PWR Shift Registers applications.

• Counter
• Data Format Converters
• Data manipulation
• Pseudo Random Pattern Generator
• Parallel data
• Generate time delay toward digital circuits
• data transfer
• Remote control holding register
• Dual-rank shift, hold, and bus applications
• Serial-to-parallel data conversion