SN74LS374DW Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. The operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74LS series. This D flip flop should not have a frequency greater than 50MHz. The element count is 1 . Despite external influences, it consumes 40mAof quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LS374 family contains this object. An input voltage of 5Vpowers the D latch. It belongs to the family of electronic devices known as LS. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. The power supply is 5V. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. This input has 3lines. 8is the number of channels.

SN74LS374DW Features

Tube package
74LS series
20 pins
8 Bits
5V power supplies

SN74LS374DW Applications

There are a lot of Texas Instruments SN74LS374DW Flip Flops applications.

• Computers
• Patented noise
• Instrumentation
• Load Control
• Test & Measurement
• Reduced system switching noise
• Guaranteed simultaneous switching noise level
• Storage Registers
• Dynamic threshold performance
• Frequency division