SN74LS596N Overview

The device is embedded in 16-DIP (0.300, 7.62mm) package. 16 is the total number of terminations on the chip. The Tube case contains it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. 16 pins are present on the device. It is recommended that the mount should be done by Through Hole. Electronic components fall under the category of LS. Mounted in the same way as Through Hole. A temperature range of 0°C~70°C is used for the operating environment. Voltages within 4.75V~5.25V are supplied to the device. Similar parts can be found using the 74LS family. Similar parts can be found by searching for the 74LS596 family. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. A voltage of 5V is possible with this device. It has a total of 8 pins. This device has 8 circuits. The device runs its frequency at 20MHz.

SN74LS596N Features

With 16 pins
Mounted in Through Hole type.
Based on 74LS596 family
Operate supply voltage at 5V
It supplies 5V power

SN74LS596N Applications

There are a lot of Texas Instruments SN74LS596N Shift Registers applications.

• Serial-to-parallel data conversion
• Output expansion
• Remote control holding register
• Pulse Extenders
• LED matrix control
• Counter
• Remote control holding register
• Flash Memory
• Data Format Converters
• Dual-rank shift, hold, and bus applications