SN74LS74ANSRG4 Overview

In the form of 14-SOIC (0.209, 5.30mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LS series. Its output frequency should not exceed 33MHz Hz. Currently, there are 14 terminations. This D latch belongs to the family of 74LS74. Power is provided by a 5V supply. It is a member of the LSfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. Its flexibility is enhanced by 2 circuits. This D flip flop is well suited for TR based on its reliable performance. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 8mA. A total of 3input lines have been provided.

SN74LS74ANSRG4 Features

Tape & Reel (TR) package
74LS series
14 pins
5V power supplies

SN74LS74ANSRG4 Applications

There are a lot of Texas Instruments SN74LS74ANSRG4 Flip Flops applications.

• Matched Rise and Fall
• Memory
• Latch-up performance
• Counters
• Parallel data storage
• Clock pulse
• Convert a momentary switch to a toggle switch
• Data transfer
• Balanced 24 mA output drivers
• Consumer