SN74LV174APWRG4 Overview
TSSOPis the way it is packaged. It is included in the package Tape & Reel (TR). There are 16 terminations,Power is supplied from a voltage of 2.5V volts. LV/LV-A/LVX/His the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 6bits are used in this part. To achieve this superior flexibility, 7 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 3.3V watts. There are 1 output lines on it. Currently, there are 2 lines of input. There is -12mA output current at the high level. There is 12mA output current at the low level. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 180MHzis the maximum frequency that can be achieved. This logic IC is D FLIP-FLOP. A total of 1 functions are provided by this T flip flop. With 16 pins, it is equipped with a low power consumption. As a result of the output current of 12mA, the design flexibility is maximized.
SN74LV174APWRG4 Features
Tape & Reel (TR) package
16 pins
6 Bits
3.3V power supplies
1 Functions
16 pin count
SN74LV174APWRG4 Applications
There are a lot of Texas Instruments
SN74LV174APWRG4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
