SN74LV175ADBRG4 Overview
It is packaged in the way of 16-SSOP (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~5.5V volts. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74LVseries contain this type of chip. Its output frequency should not exceed 165MHz. D latch consists of 1 elements. It consumes 20μA of quiescent current without being affected by external factors. Currently, there are 16 terminations. You can search similar parts based on 74LV175. The power supply voltage is 2.5V. Its input capacitance is 1.4pF farads. This D flip flop belongs to the family of LV/LV-A/LVX/H. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 16pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. An electronic part designed with 4bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be kept above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 3.3V volts. With a current output of 12mA , it offers maximum design flexibility. It has 4 output lines to operate.
SN74LV175ADBRG4 Features
Tape & Reel (TR) package
74LV series
16 pins
4 Bits
3.3V power supplies
SN74LV175ADBRG4 Applications
There are a lot of Texas Instruments SN74LV175ADBRG4 Flip Flops applications.
- Modulo – n – counter
- Supports Live Insertion
- Differential Individual
- Single Down Count-Control Line
- Reduced system switching noise
- Balanced Propagation Delays
- ESD protection
- 2 – Bit synchronous counter
- Parallel data storage
- ATE
