SN74LV175APWG4 Overview

As a result, it is packaged as 16-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. This output is configured with Differential. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74LVseries FPGA. You should not exceed 165MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 20μA of quiescent current without being affected by external factors. The number of terminations is 16. This D latch belongs to the family of 74LV175. Power is provided by a 2.5V supply. This T flip flop has a capacitance of 1.4pF farads at the input. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. Surface Mount mounts this electronic component. A total of 16pins are provided on this board. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. There are 4bits in its design. The maximal supply voltage (Vsup) reaches 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. In order for the device to operate, it requires 3.3V power supplies. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. This input has 4lines in it.

SN74LV175APWG4 Features

Tube package
74LV series
16 pins
4 Bits
3.3V power supplies

SN74LV175APWG4 Applications

There are a lot of Texas Instruments SN74LV175APWG4 Flip Flops applications.

• Convert a momentary switch to a toggle switch
• Test & Measurement
• Clock pulse
• Shift Registers
• Count Modes
• Parallel data storage
• Registers
• Shift registers
• Instrumentation
• Set-reset capability