SN74LV273APW Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. Package Tubeembeds it. There is a Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74LVseries of FPGAs. A frequency of 160MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. Terminations are 20. The 74LV273 family contains this object. Power is supplied from a voltage of 2.5V volts. JK flip flop input capacitance is 2pF farads. This D flip flop belongs to the family of LV/LV-A/LVX/H. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchbase part number assigned to the RS flip flops. The design is based on 8bits. Vsup reaches 5.5V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. 8 circuits are used to achieve its superior flexibility. It runs on 3.3Vvolts of power. This T flip flop features a maximum design flexibility due to its output current of 12mA. As of now, there are 2input lines.

SN74LV273APW Features

Tube package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV273APW Applications

There are a lot of Texas Instruments SN74LV273APW Flip Flops applications.

• Balanced Propagation Delays
• ESD protection
• Single Down Count-Control Line
• Supports Live Insertion
• Memory
• Individual Asynchronous Resets
• Synchronous counter
• Common Clocks
• ESCC
• Reduced system switching noise