SN74LV273ARGYR Overview

The flip flop is packaged in a case of 20-VFQFN Exposed Pad. There is an embedded version in the package Cut Tape (CT). This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. In the operating environment, the temperature is -40°C~125°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74LV series. Its output frequency should not exceed 160MHz. In total, it contains 1 elements. There is 20μA quiescent consumption. The number of terminations is 20. If you search by 74LV273, you will find similar parts. The power supply voltage is 2.5V. Input capacitance of this device is 2pF farads. LV/LV-A/LVX/His the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in its design. Vsup reaches its maximum value at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. A total of 3.3V power supplies are needed to run it. With an output current of 12mA, it is possible to design the device in any way you want. 2input lines are available for you to choose from.

SN74LV273ARGYR Features

Cut Tape (CT) package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV273ARGYR Applications

There are a lot of Texas Instruments SN74LV273ARGYR Flip Flops applications.

• Synchronous counter
• Asynchronous counter
• Storage Registers
• Convert a momentary switch to a toggle switch
• Data transfer
• Automotive
• Parallel data storage
• Modulo – n – counter
• Latch
• Supports Live Insertion