SN74LV374ATPWE4 Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The 74LVseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 150MHz. In total, there are 1 elements. As a result, it consumes 2μA quiescent current and is not affected by external forces. There are 20 terminations,If you search by 74LV374, you will find similar parts. It is powered by a voltage of 2.5V . Its input capacitance is 4pFfarads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Surface Mount mounts this electronic component. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. Its flexibility is enhanced by 8 circuits. The power supply is 3.3V. A total of 2ports are embedded in the D flip flop. With an output current of 16mA, it is possible to design the device in any way you want. This input has 2lines.
SN74LV374ATPWE4 Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATPWE4 Applications
There are a lot of Texas Instruments SN74LV374ATPWE4 Flip Flops applications.
- Buffer registers
- ESD protection
- Latch
- Dynamic threshold performance
- Matched Rise and Fall
- Bounce elimination switch
- Divide a clock signal by 2 or 4
- Cold spare funcion
- Clock pulse
- Circuit Design
