SN74LV374ATRGYR Overview

The flip flop is packaged in a case of 20-VFQFN Exposed Pad. It is included in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74LVseries contain this type of chip. This D flip flop should not have a frequency greater than 150MHz. D latch consists of 1 elements. There is a consumption of 2μAof quiescent energy. Terminations are 20. The object belongs to the 74LV374 family. The D flip flop is powered by a voltage of 2.5V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of LV/LV-A/LVX/H. Surface Mount mounts this electronic component. This board has 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. Vsup reaches its maximum value at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 3.3V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This T flip flop features a maximum design flexibility due to its output current of 16mA. A total of 2input lines have been provided.

SN74LV374ATRGYR Features

Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV374ATRGYR Applications

There are a lot of Texas Instruments SN74LV374ATRGYR Flip Flops applications.

• Consumer
• Buffer registers
• Computers
• Safety Clamp
• Cold spare funcion
• Counters
• Synchronous counter
• Guaranteed simultaneous switching noise level
• Individual Asynchronous Resets
• Common Clocks