SN74LV4052ATDREP Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~105°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with 74LV4052 to find analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 20μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 2V~5.5V volts. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. Operating the 8 inputs requires 8 inputs. There are 50MHz bandwidths for data transfer.

SN74LV4052ATDREP Features

4 Channels
Switch Circuit: SP4T
20μA Supply Current
Bandwidth: 50MHz

SN74LV4052ATDREP Applications

There are a lot of Texas Instruments
SN74LV4052ATDREP Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement