SN74LV4053ARGYR Overview

Packed in 16-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. Advanced packaging method Cut Tape (CT) is used to provide high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. There are 3 circuits in this switch device. Try searching for the analog switch ic with 74LV4053 if you are looking for variants. In this multiplexer, the internal resistance is 75Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2V. An operating current of 20μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Operating 6 inputs is required. There are various bandwidths available for data transfer.

SN74LV4053ARGYR Features

2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz

SN74LV4053ARGYR Applications

There are a lot of Texas Instruments SN74LV4053ARGYR Analog Switches & Multiplexers ICs applications.

• DVD-R
• Industrial
• Cell phones
• CSU
• Channelized and Unchannelized DS3 applications
• Data switching
• Communication systems
• Voice over IP/DSL – Integrated Access Devices, Smart
• Cable PC
• ISDN NT1/TA