SN74LV4066APWRG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 14. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. 74LV4066 can be used to search for analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analog switch ics with Single supply type are cost-effective. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 20μA. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 20μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A 50MHz-bandwidth can be used for data transfer.

SN74LV4066APWRG4 Features

4 Channels
Switch Circuit: SPST - NO
20μA Supply Current
Bandwidth: 50MHz

SN74LV4066APWRG4 Applications

There are a lot of Texas Instruments SN74LV4066APWRG4 Analog Switches & Multiplexers ICs applications.

• Audio and video signal routing
• Residential Gateways, Home Gateway/Router
• Digital access cross connects
• Battery-powered systems
• Microprocessor Controlled Analog Systems
• PCMCIA cards
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Precision instrumentation
• SONET/SDH ADM
• Channel Banks