SN74LV573ATDBRE4 Overview

The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). The package is in the form of Tape & Reel (TR). The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is used for operation. The 74LV series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. The family in which it belongs to is 74LV573. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. It is part of the family of electronic devices called LV/LV-A/LVX/H. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. There are 5V power supplies required for this machine to operate. (Vsup) should be greater than 4.5V. There are electronic circuits attached to the 8 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 16mA output current, it offers maximum design flexibility.

SN74LV573ATDBRE4 Features

20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies

SN74LV573ATDBRE4 Applications

There are a lot of Texas Instruments SN74LV573ATDBRE4 Latches applications.

• Sample and hold register
• Double bus register system
• Buffer/Storage Registers
• Counters
• Decade counting 7-segment decimal display
• PCs and Notebooks
• Pattern Generators
• Up/down difference counting
• Counter
• Hammer