SN74LVC112APWRE4 Overview
TSSOPis the way it is packaged. It is included in the package Tape & Reel (TR). In total, it contains 2 elements. There are 16 terminations,Power is supplied from a voltage of 1.8V volts. LVC/LCX/Zis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. A Negative Edgeclock edge trigger is used in this device. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. Currently, there are 3 lines of input. There is -24mA output current at the high level. There is 24mA output current at the low level. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 1.65V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 3.6V. 150MHzis the maximum frequency that can be achieved. This logic IC is J-K FLIP-FLOP. A total of 2 functions are provided by this T flip flop. With 16 pins, it is equipped with a low power consumption. As a result of the output current of 24mA, the design flexibility is maximized.
SN74LVC112APWRE4 Features
Tape & Reel (TR) package
16 pins
2 Functions
16 pin count
SN74LVC112APWRE4 Applications
There are a lot of Texas Instruments
SN74LVC112APWRE4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
