SN74LVC157ADBR Overview

In order to save board space, digital switch is located in the 16-SSOP (0.209, 5.30mm Width).Cut Tape (CT) is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~3.6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74LVC series are suitable for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number of 74LVC157 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 1.8V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.It is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.In the signal multiplexer, there are 2 bits available.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, power supply 3.3V is provided.As part of the operation of this turn signal switch, there are 1 outputs.The multiplexer is equipped with 8 inputs.Currently, the switches is packaged in accordance with the TR method.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.

SN74LVC157ADBR Features

Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V

SN74LVC157ADBR Applications

There are a lot of Texas Instruments SN74LVC157ADBR Signal Switches / Multiplexers / Decoders applications.

• Electronically controlled engine system
• RF-based home automation system
• Enabling different rows of memory depending on address in memory chips
• Analog, digital or video signal switching
• Make full adder
• Seven segment displays
• Automatic health monitoring systems
• Automatic Monitoring systems
• Frequency multiplexing system
• Control unit of Central Processing unit (CPU)