SN74LVC16374DL Overview

The package is in the form of 48-BSSOP (0.295, 7.50mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 1.65V~3.6V volts, it operates. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 150MHz Hz. In total, it contains 2 elements. There is a consumption of 20μAof quiescent energy. A total of 48 terminations have been made. D latch belongs to the 74LVC16374 family. A voltage of 3.3V is used as the power supply for this D latch. This JK flip flop has a 5pFfarad input capacitance. Devices in the LVC/LCX/Zfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board has 48 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 16bits. The maximal supply voltage (Vsup) reaches 3.6V. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 3.3V. This T flip flop features a maximum design flexibility due to its output current of 24mA. It is designed with 1 output lines.

SN74LVC16374DL Features

Tube package
74LVC series
48 pins
16 Bits

SN74LVC16374DL Applications

There are a lot of Texas Instruments SN74LVC16374DL Flip Flops applications.

• Storage registers
• Digital electronics systems
• Balanced 24 mA output drivers
• Safety Clamp
• Shift registers
• ATE
• Common Clocks
• Counters
• Frequency Divider circuits
• Clock pulse