SN74LVC1G74RSER Overview

The flip flop is packaged in a case of 8-UFQFN. The Tape & Reel (TR)package contains it. There is a Differentialoutput configured with it. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~5.5V. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74LVC series. It should not exceed 200MHzin its output frequency. It consumes 10μA of quiescent There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74LVC1G74. It is powered from a supply voltage of 1.8V. There is 5pF input capacitance for this T flip flop. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. 8pins are included in its design. This device's clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 1bits in its design. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. The superior flexibility of this circuit is achieved by using 1 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. It runs on 3.3Vvolts of power. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA. There are 2 gates in its basic building block.

SN74LVC1G74RSER Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates

SN74LVC1G74RSER Applications

There are a lot of Texas Instruments SN74LVC1G74RSER Flip Flops applications.

• Individual Asynchronous Resets
• Asynchronous counter
• Consumer
• Guaranteed simultaneous switching noise level
• Balanced Propagation Delays
• Convert a momentary switch to a toggle switch
• EMI reduction circuitry
• Clock pulse
• Instrumentation
• Set-reset capability