There is a neat TFSOP package used in buffer. A Tape and Reel external packaging is used for this buffer. A total of 2 elements are used. 20 terminations with different functions are available on this transceiver. An input voltage of 1.8V is required. LVC/LCX/Z family part. With the electrical part, 20 pins are set. Surface Mount applications are suitable for it. There are 20 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 4 bits. In particular, automotive buffer is a type of Bus Driver/Transceivers. When the electronic component is quiescent, it uses 10μA. The package is usually shaped like a TR. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 12mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -12mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 1.65V. It is rated for a maximum supply voltage of 3.6V. The logical driver has the ability to output 3 signal lines at the same time. ICs that use BUS DRIVER logic are known as BUS DRIVER logic transceivers. There is sufficient data to make 8 outputs from it. ENABLE LOW control technology allows the logical driver to start up.
SN74LVC2244ADGVRE4 Features
Bus Driver/Transceivers High Level Output: 12mA Low Level Output: -12mA BUS DRIVER Logic IC
SN74LVC2244ADGVRE4 Applications
There are a lot of Texas Instruments SN74LVC2244ADGVRE4 Buffers & Transceivers applications.