SN74LVC2G66QDCURQ1 Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electrical component body receives 8 pins. These analog multiplexers are built based on SPST - NO switching circuits. Using the 74LVC2G66 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 15Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 15μA. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 100nA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. 300MHz bandwidths enable data to be transferred. The Automotive, AEC-Q100 series is responsible for it.

SN74LVC2G66QDCURQ1 Features

2 Channels
Switch Circuit: SPST - NO
15μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz

SN74LVC2G66QDCURQ1 Applications

There are a lot of Texas Instruments SN74LVC2G66QDCURQ1 Analog Switches & Multiplexers ICs applications.

• Channel Banks
• USB 1.1 signal switching circuits
• Video switching
• MP3 players
• Relay Replacement
• Precision test equipment
• Fiber In The Loop (FITL)
• Central office
• PBX interfaces
• Frame Relay Equipment