SN74LVC2G74DCTR Overview

The item is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)cases. Package Cut Tape (CT)embeds it. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A 1.65V~5.5Vsupply voltage is required for it to operate. It is at -40°C~125°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 200MHz. Currently, there are 8 terminations. You can search similar parts based on 74LVC2G74. It is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. The 8pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 1bits. The maximal supply voltage (Vsup) reaches 5.5V. This D flip flop is well suited for TR based on its reliable performance. It operates from 3.3V power supplies. With a current output of 32mA , it offers maximum design flexibility. 10μAquiescent current consumed. Currently, there are 1 channels available. In its basic form, it contains 2 gates.

SN74LVC2G74DCTR Features

Cut Tape (CT) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates

SN74LVC2G74DCTR Applications

There are a lot of Texas Instruments SN74LVC2G74DCTR Flip Flops applications.

• Instrumentation
• Data transfer
• Load Control
• Computing
• Balanced Propagation Delays
• Individual Asynchronous Resets
• Patented noise
• Frequency Dividers
• High Performance Logic for test systems
• Consumer