1.65V~5.5V 140MHz 1 Bit D-Type Flip Flop DUAL 74LVC2G74 8 Pins 10μA 74LVC Series 8-VFSOP (0.091, 2.30mm Width)
SOT-23
SN74LVC2G74DCURE4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 1 week ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-VFSOP (0.091, 2.30mm Width)
Number of Pins
8
Weight
9.610488mg
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Series
74LVC
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Type
D-Type
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
FF/Latches
Packing Method
TR
Technology
CMOS
Voltage - Supply
1.65V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Base Part Number
74LVC2G74
Function
Set(Preset) and Reset
Output Type
Differential
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
3.3V
Number of Circuits
1
Number of Bits
1
Clock Frequency
140MHz
Propagation Delay
6.2 ns
Turn On Delay Time
4.1 ns
Family
LVC/LCX/Z
Logic Function
AND, D-Type
Current - Quiescent (Iq)
10μA
Output Characteristics
3-STATE
Current - Output High, Low
32mA 32mA
Number of Gates
2
Max Propagation Delay @ V, Max CL
5.1ns @ 5V, 50pF
Prop. [email protected]
5.9 ns
Trigger Type
Positive Edge
Input Capacitance
5pF
Clock Edge Trigger Type
Positive Edge
Height
900μm
Length
2.3mm
Width
2mm
Thickness
850μm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74LVC2G74DCURE4 Product Details
SN74LVC2G74DCURE4 Overview
The package is in the form of 8-VFSOP (0.091, 2.30mm Width). The package Tape & Reel (TR)contains it. In the configuration, Differentialis used as the output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. There should be no greater frequency than 140MHzon its output. As a result, it consumes 10μA quiescent current. 8terminations have occurred. This D latch belongs to the family of 74LVC2G74. The power supply voltage is 1.8V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. The 8pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. An electronic part with 1bits has been designed. There is a 5.5Vmaximum supply voltage (Vsup). The superior flexibility of this circuit is achieved by using 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. It operates from 3.3V power supplies. The building block contains a total of 2 gates.
SN74LVC2G74DCURE4 Features
Tape & Reel (TR) package 74LVC series 8 pins 1 Bits 3.3V power supplies 2 gates
SN74LVC2G74DCURE4 Applications
There are a lot of Texas Instruments SN74LVC2G74DCURE4 Flip Flops applications.