SN74LVC32374AZKER Overview

The package is in the form of 96-LFBGA. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 150MHz. A total of 4 elements are present. As a result, it consumes 40μA quiescent current. There are 96 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC32374 family. Power is supplied from a voltage of 1.8V volts. A 5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family LVC/LCX/Zcan be found here. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 96. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. There are 32bits in its design. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be maintained above 1.65V for normal operation. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 3.3V watts. The flip flop has 2ports embedded within it. In order to operate, the chip has 8 output lines.

SN74LVC32374AZKER Features

Tape & Reel (TR) package
74LVC series
96 pins
32 Bits
3.3V power supplies

SN74LVC32374AZKER Applications

There are a lot of Texas Instruments SN74LVC32374AZKER Flip Flops applications.

• Latch
• Balanced 24 mA output drivers
• High Performance Logic for test systems
• Single Down Count-Control Line
• Cold spare funcion
• Load Control
• Single Up Count-Control Line
• Convert a momentary switch to a toggle switch
• Safety Clamp
• Memory