SN74LVC574ANSRE4 Overview
It is packaged in the way of SOP. D flip flop is embedded in the Tape & Reel (TR) package. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 1.8V. This D flip flop belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. 8 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -24mA. The low level output current is set to 24mA. The operating temperature should be lower than 125°C. The operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 1.65V. It supports the maximal supply voltage of 3.6V. The frequency that can be achieved is 150MHz. The logic IC it adopts is BUS DRIVER. It is equipped with 1 Functions . It is equipped with 20 pin count. The output current of 24mA makes it feature maximum design flexibility.
SN74LVC574ANSRE4 Features
Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count
SN74LVC574ANSRE4 Applications
There are a lot of Texas Instruments
SN74LVC574ANSRE4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
