SN74LVC574ARGYR Overview

As a result, it is packaged as 20-VFQFN Exposed Pad. You can find it in the Cut Tape (CT)package. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. This D flip flop should not have a frequency greater than 150MHz. A total of 1elements are contained within it. As a result, it consumes 1.5μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC574 family contains this object. The D flip flop is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. The superior flexibility is achieved through the use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 2ports are embedded in the D flip flop. It offers maximum design flexibility with its output current of 24mA. A total of 3input lines have been provided.

SN74LVC574ARGYR Features

Cut Tape (CT) package
74LVC series
20 pins
8 Bits

SN74LVC574ARGYR Applications

There are a lot of Texas Instruments SN74LVC574ARGYR Flip Flops applications.

• Guaranteed simultaneous switching noise level
• Storage Registers
• Buffer registers
• Matched Rise and Fall
• Asynchronous counter
• Set-reset capability
• Counters
• Reduced system switching noise
• Functionally equivalent to the MC10/100EL29
• Bus hold