SN74LVC823ADWRG4 Overview
It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LVC series. A frequency of 150MHzshould not be exceeded by its output. A total of 1 elements are present. There is a consumption of 10μAof quiescent energy. The number of terminations is 24. The 74LVC823family includes it. It is powered by a voltage of 1.8V . This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 9bits. As soon as 3.6Vis reached, Vsup reaches its maximum value. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. The D flip flop is embedded with 2ports. It operates with 9 output lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74LVC823ADWRG4 Features
Tape & Reel (TR) package
74LVC series
24 pins
9 Bits
3.3V power supplies
SN74LVC823ADWRG4 Applications
There are a lot of Texas Instruments SN74LVC823ADWRG4 Flip Flops applications.
- Data storage
- Frequency Divider circuits
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Set-reset capability
- QML qualified product
- Instrumentation
- Pattern generators
- Storage Registers
- Buffered Clock
