SN74LVCH16374AGQLR Overview

56-VFBGAis the way it is packaged. As part of the package Cut Tape (CT), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74LVCHseries of FPGAs. There should be no greater frequency than 150MHzon its output. In total, it contains 2 elements. There is a consumption of 20μAof quiescent energy. The number of terminations is 56. If you search by 74LVCH16374, you will find similar parts. It is powered from a supply voltage of 1.8V. The input capacitance of this JK flip flopis 5pF farads. A device of this type belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. This board has 56 pins. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in this flip flop. A normal operating voltage (Vsup) should remain above 1.65V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The flip flop contains 2ports. In order to operate, the chip has 3 output lines. This input has 8lines in it.

SN74LVCH16374AGQLR Features

Cut Tape (CT) package
74LVCH series
56 pins
16 Bits

SN74LVCH16374AGQLR Applications

There are a lot of Texas Instruments SN74LVCH16374AGQLR Flip Flops applications.

• Common Clocks
• ATE
• Frequency Dividers
• QML qualified product
• Load Control
• EMI reduction circuitry
• Safety Clamp
• Reduced system switching noise
• Matched Rise and Fall
• 2 – Bit synchronous counter