SN74LVTH16374DL Overview

The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to 2.7V~3.6V. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74LVTH series. You should not exceed 160MHzin the output frequency of the device. A total of 2elements are present in it. During its operation, it consumes 190μA quiescent energy. A total of 48terminations have been recorded. If you search by 74LVTH16374, you will find similar parts. The power source is powered by 3.3V. This JK flip flop has a 3pFfarad input capacitance. In terms of electronic devices, this device belongs to the LVTfamily of devices. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. Its clock edge trigger type is Positive Edge. This device has the base part number Bus Driver/Transceiver. There are 16bits in its design. This flip flop has a total of 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. With an output current of 64mA, it is possible to design the device in any way you want. It is designed with 3 output lines. A total of 1input lines have been provided.

SN74LVTH16374DL Features

Tube package
74LVTH series
48 pins
16 Bits

SN74LVTH16374DL Applications

There are a lot of Texas Instruments SN74LVTH16374DL Flip Flops applications.

• ATE
• Event Detectors
• Count Modes
• ESD performance
• Parallel data storage
• Registers
• Instrumentation
• Latch
• Safety Clamp
• Modulo – n – counter