SN74LVTH16374GQLR Overview

It is embeded in 56-VFBGA case. As part of the package Cut Tape (CT), it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74LVTHseries contain this type of chip. It should not exceed 160MHzin terms of its output frequency. A total of 2 elements are present. This process consumes 190μA quiescents. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74LVTH16374. The power source is powered by 3.3V. Its input capacitance is 3pF farads. Devices in the LVTfamily are electronic devices. It is mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 16bits are used in this part. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be kept at 3.3V. There are 3 output lines in this JK flip flop. It is reported that there are 1 input lines.

SN74LVTH16374GQLR Features

Cut Tape (CT) package
74LVTH series
56 pins
16 Bits

SN74LVTH16374GQLR Applications

There are a lot of Texas Instruments SN74LVTH16374GQLR Flip Flops applications.

• 2 – Bit synchronous counter
• Common Clocks
• Differential Individual
• ESD protection
• Consumer
• Guaranteed simultaneous switching noise level
• Memory
• Frequency Dividers
• Clock pulse
• Modulo – n – counter