SN74LVTH574GQNR Overview
20-VFBGAis the packaging method. The Cut Tape (CT)package contains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2.7V~3.6V. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74LVTHseries contain this type of chip. You should not exceed 150MHzin its output frequency. In total, there are 1 elements. During its operation, it consumes 190μA quiescent energy. Currently, there are 20 terminations. If you search by 74LVTH574, you will find similar parts. It is powered from a supply voltage of 3.3V. A JK flip flop with a 3pFfarad input capacitance is used here. LVTis the family of this D flip flop. It is mounted by the way of Surface Mount. There are 20pins on it. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 8. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency. To operate, the chip has a total of 3 output lines.
SN74LVTH574GQNR Features
Cut Tape (CT) package
74LVTH series
20 pins
8 Bits
SN74LVTH574GQNR Applications
There are a lot of Texas Instruments SN74LVTH574GQNR Flip Flops applications.
- Frequency Divider circuits
- Reduced system switching noise
- Consumer
- ESD performance
- Circuit Design
- Shift registers
- Synchronous counter
- Functionally equivalent to the MC10/100EL29
- High Performance Logic for test systems
- Matched Rise and Fall
