This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.209, 5.30mm Width) package.This receiver is mounted in the Cut Tape (CT) package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -20°C~85°C operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.Since the part number SN751178 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 16-pin driver IC.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.It is designed so that it can be operated from a 5V power supply with this driver IC.With this integrating circuit you can drive LEDs of a voltage of up to 110mA. It can be used to drive large displays.In total, 2 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.If the input current exceeds 110mA, this can transceiver could malfunction.In total, there are 1 circuits integrated within this transceiver module.