5V 56 Pin 75LVDM977 Receivers9/9 Drivers/ReceiversMin 4.75V VMax 5.25V V
SOT-23
SN75LVDM977DGGG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
56-TFSOP (0.240, 6.10mm Width)
Number of Pins
56
Supplier Device Package
56-TSSOP
Weight
252.792698mg
Operating Temperature
0°C~70°C
Packaging
Tube
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
2 (1 Year)
Type
Transceiver
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Voltage - Supply
4.75V~5.25V
Base Part Number
75LVDM977
Operating Supply Voltage
5V
Number of Elements
9
Max Supply Voltage
5.25V
Min Supply Voltage
4.75V
Operating Supply Current
26mA
Nominal Supply Current
26mA
Power Dissipation
978mW
Propagation Delay
12.5 ns
Turn On Delay Time
12.5 ns
Number of Drivers/Receivers
9/9
Number of Drivers
9
Number of Transceivers
1
Number of Receivers
9
Number of Transmitters
9
Height
1.15mm
Length
14mm
Width
6.1mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
SN75LVDM977DGGG4 Product Details
SN75LVDM977DGGG4 Overview
Designed for common LEDs, this driver IC features an enhanced 56-TFSOP (0.240, 6.10mm Width) package.The Tube package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver requires a 4.75V~5.25V power supply.During operation, this electronic part may have up to 9/9 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.For more variants of this part, try searching with the base part number 75LVDM977, which indicates the product type, temperature, package, etc.This is a 56-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This transceiver module is designed to operate from an input voltage supply of 5V.There are 1 transceivers in total implemented by this IC.There are 9 receivers inside.The integrator circuit has embedded 9 drivers.During operation, the transceiver module's temperature must be below 70°C.It must not be less than 0°C degrees Celsius for this optical transceiver to operate properly.This integrating circuit is able to drive LEDs with an input voltage of 26mA.The transceiver's maximum supply voltage of this IC is rated at 5.25V.A transmitter, or can transceiver that produces radio waves with the aid of an antenna, is used in telecommunications to transmit or send data.There is a minimum required supply voltage of 4.75V for this line driver ic.This wide receiver utilizes the 56-TSSOP supplier package.9 elements are included in this integrated circuit to facilitate multiple tasks at the same time.
SN75LVDM977DGGG4 Features
Tube package 56 pins 9 elements
SN75LVDM977DGGG4 Applications
There are a lot of Texas Instruments SN75LVDM977DGGG4 Drivers/Receivers/Transceivers applications.