An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.Since the base part number SN888 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There should be enough current supplied to the VCC pin of the part, but not more than 0.9mA.An input voltage of 900μA is recommended for this integrating circuit to be able to drive LEDs.In total, 1 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.
SN888CDR Features
Tape & Reel (TR) package 8 pins 5V power supply
SN888CDR Applications
There are a lot of Texas Instruments SN888CDR Drivers/Receivers/Transceivers applications.