SNJ54ALS373AFK Overview

The package in which it is embedded is named CLCC. This package has the format of Rail/Tube. TTL is used for the output it is configured with. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of ALS. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. There are 5V power supplies attached to it. An electronic circuit can be found on 8 input lines. A high level of efficiency is achieved by maintaining the supply voltage at 5V. A total of 1 elements make up this object. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 27mA. It is set to zero for the low level output current. It is set to zero for the high level output current. Ideally, the temperature should not be higher than 125°C. A temperature greater than -55°C should be used as the operating temperature. There is a maximum supply voltage of 5.5V supported by this device. This device requires a minimum voltage of 4.5V. As for the logic IC it uses, it is a BUS DRIVER.

SNJ54ALS373AFK Features

CLCC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements

SNJ54ALS373AFK Applications

There are a lot of Texas Instruments
SNJ54ALS373AFK Latches applications.

• Parallel data storage
• Digital bus buffer
• Flip-flops
• Parallel data synchronization
• Parallel data storage
• Shift register
• Pattern generators
• Automotive Infotainment
• Automotive Cluster
• Automotive ADAS