SNJ54AS240AJ Overview

CDIP case is available for the cut smart buffer. In case Rail/Tube, the cut smart buffer is available. A total of 20 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. There is a place for it in the way of Through Hole. On this board, there is a pin count of 20. In order for the timeing clock to operate, it is connected to the 20 pins. There is a circuit clock contained within Bus Driver/Transceivers that is responsible for this function. It is designed to operate at a minimum temperature of -55°C in order to maintain reliability. In order to ensure stable operation, the maximum operating temperature must be set to 125°C. The electronic gadget belongs to the AS family. An IC with a value of BUS DRIVER is used in order to achieve this. By default, the output of the circuit clock is set to 8. There is a 5V volt supply that powers the timeing clock. It is capable of handling a maximum supply voltage of 5.5V volts. As low as possible is the source voltage 4.5V, which can be used by the system to work. It is recommended that the supply voltage be kept at 5V for maximum efficiency. This clock buffer is configured as a 4 bit device. It has 2 ports configured. The element has a total of 2 elements in it. A value of TTL is used in the configuration of the output.

SNJ54AS240AJ Features

20 terminations
Bus Driver/Transceivers subcategory
logic IC type of BUS DRIVER

SNJ54AS240AJ Applications

There are a lot of Texas Instruments
SNJ54AS240AJ Clock Buffers & Drivers applications.

• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics
• Data communication
• Telecommunications
• Computing