SNJ54LS283J Overview
This is a device supplied in the CDIP package. There are 16terminations used for configuring it. The supply voltage of 5V permits it to operate with full flexibility. There are 1 terminations on the device. There are a total of 16 pins in all components. As part of the circuit, there are 16pins used to connect other components. It is mounted in the direction of [0]. The LSfamily is derived from it. In the device, the information consists of 4 bits. These electronic devices have many important features, and FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGis one of them. It is manufactured in the temperature grade MILITARY. It is packed with [0]. In this case, there is 5V voltage coming from the voltage source. The device operates on a supply voltage of [0]. The electrical characteristics remain stable at maximum temperature 125°Cfor extended periods. This device is designed to operate within a specific temperature range, with the lower limit generally set at -55°C. 5.5Vis the maximum voltage that the device can handle. In the case of this device, the minimum voltage is as low as 4.5V volts. The logic IC type is [0]. An output voltage of a certain high level causes -400μAcurrent to flow into the output. If a specified low-level voltage is applied to the output terminal, there is 4mA current flowing.
SNJ54LS283J Features
Embedded in the CDIP package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type
SNJ54LS283J Applications
There are a lot of Texas Instruments
SNJ54LS283J Counters & Dividers applications.
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
- Up Counters
- Dual Up Counters
