SNJ54S283J Overview

In the CDIPpackage, it is supplied. In order to configure it, it uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. There are wires connecting 1elements. The total number of component pins is 16. Packaging is based on Rail/Tube. To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. In this case, it appears as a member of the family [0]. In this device, there is information of 4bits. It is important to note that in regards to this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGis an extremely significant feature. The device is manufactured at a temperature grade of MILITARY. The device requires a supply voltage of [0]. Electrical characteristics are stable at temperature 125°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. In this case, the maximum voltage available to the device is 5.5V. A minimum voltage of 4.5Vis available for the device. This device uses a logic IC type of [0]. In the case of a specified high-level voltage, there is -1mA current flowing into the output. The output terminal has 20mA current flowing into it when the voltage is set to a low level.

SNJ54S283J Features

Embedded in the CDIP package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type

SNJ54S283J Applications

There are a lot of Texas Instruments
SNJ54S283J Counters & Dividers applications.

• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications
• Clocks