THS1030CDWG4 Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 28-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 30M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to THS1030 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 3V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 3V.This electrical digital converter operates from a supply voltage of 3.3V.The ADC converter operates from 3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 120mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 150mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 30 Msps.The digital converter operates with the minimal supply voltage (DC) of 3V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.

THS1030CDWG4 Features

1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 3V
3/5V power supplies
Maximal supply voltage (DC) of 5.5V

THS1030CDWG4 Applications

There are a lot of Texas Instruments THS1030CDWG4 ADC applications.

• Music recording
• Instrumentation and test equipment
• Battery Operated Systems
• Multiplexed Data Acquisition Systems
• Scientific instruments.
• Imaging Systems
• 3-phase power control
• Micro and pico cell systems, software radios
• Smart antenna systems
• Wireless local loop