THS4051MJGB Overview

In order to protect the op amps, a CDIP case is used. There are two types of operational amplifiers in this circuit. In the case of Rail/Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 10mV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -55°C ~ 125°C for optimal performance. Maintain 75.56dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out No signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -55°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. This electronic part is recommended to be used with an 8.5mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 33V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 9V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 16.5V. - is the number that corresponds to the series of the buffer op amp.

THS4051MJGB Features

8 Pins
supply voltage of 5V
75.56dB voltage gain
Output Type: No

THS4051MJGB Applications

There are a lot of Texas Instruments
THS4051MJGB Instrumentational OP Amps applications.

• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification