THS4052IDGN Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 10mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 8.5mA . Keeping the voltage gain at 75.56dB is the best course of action. On the buffer amps, there are 2 channels that can be used.

THS4052IDGN Features

8 Pins
supply voltage of 15V
75.56dB voltage gain

THS4052IDGN Applications

There are a lot of Texas Instruments THS4052IDGN Instrumentational OP Amps applications.

• Band-pass filter
• Power control
• Band-stop filter
• Proportional operation circuits
• Signal amplification
• E-book readers
• ECG equipment
• Radiation thermometry transducers
• Cinema or auditorium audio system
• Professional videography